comedi_config version 0.7.16
usage:  comedi_config [OPTIONS] <device file> [<driver> <opt1>,<opt2>,...]

OPTIONS:
  -v, --verbose
      verbose output
  -q, --quiet
      quiet output
  -V, --version
      print program version
  -i, --init-data <filename>
      Use file for driver initialization data, typically firmware code.
  -r, --remove
      remove previously configured driver
  --read-buffer <size>
      set buffer size in kilobytes used for reading
  --write-buffer <size>
      set buffer size in kilobytes used for writing

  <optN> are integers whose interpretation is driver dependent.
  In general, for PCI boards, <opt1> and <opt2> refer to the bus/slot
  indices of the board.  If not specified, a board will automatically
  be chosen.  For non-PCI boards, <opt1> specifies the I/O port base
  address and, if applicable, <opt2> specifies the IRQ.  Additional
  options may be useful, see the Comedi documentation for details.